Differences

This shows you the differences between two versions of the page.

--- qnap:raid_management [2021/02/03 07:58] – ashley
+++ qnap:raid_management [2021/02/06 08:49] (current) – [Scrolling RAID Status] ashley
@@ Line 2: / Line 2: @@
 ===== RAID Array Details =====
-The command mdadm -D /dev/md1 provides detailed information about the md1 array.
+This command provides detailed information about the md1 array.
+  mdadm -D /dev/md1
 ===== Monitor RAID Rebuild =====
   cat /proc/mdstat
+=====Scrolling RAID Status=====
+  while true; do cat /proc/mdstat; sleep 10; done
 ===== Edit RAID rebuild rate =====
-  echo 50000 > /proc/sys/dev/raid/speed_limit_min
+  echo 80000 > /proc/sys/dev/raid/speed_limit_min
-  echo 100000 > /proc/sys/dev/raid/speed_limit_max
+  echo 150000 > /proc/sys/dev/raid/speed_limit_max