Site Tools


server:esxi_move

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
server:esxi_move [2016/01/03 12:46] – ashleyserver:esxi_move [2016/09/02 23:51] (current) – ashley
Line 1: Line 1:
-====== Moving server to esxi ====== +====== ESXI notes ====== 
-====Prepare migration server==== +====Backups==== 
-  *build 64 bit server with nas4free. 9.2.972 not not 9.3 +see [[server:esxi_build]]
-  *install virtualbox bits if possible under 9.2 +
-  *move servers onto it+
  
-====Prepare existing server==== +==== Monitor with cli==== 
-  *stop cron jobs on transcode server +  esxcli hpssacli  cmd -q "controller slot=2 show config detail" 
-  *stop cron jobs on nas4free +or 
-  *uncheck "empty trash" on plex" +  /opt/hp/hpssacli/bin/hpssacli ctrl all show config detail
-  *Copy cron jobs into files +
-  *Copy THIS page into laptop+
  
-====Backup existing server==== +====Edit card with CLI==== 
-  *copy films +Surface scan speed (delay in seconds) 
-  *copy media +  esxcli hpssacli  cmd -q "controller slot=2 modify ssd=1" 
-  *copy data +Rebuld priority 
-  *copy users +  [root@esxi:~] esxcli hpssacli  cmd -q "controller slot=2 modify rp=medium" 
-  *copy backups +Read/Write ratio (in that order) 
-  *mount media as shares +  [root@esxi:~] esxcli hpssacli  cmd -q "controller slot=2 modify cr=50/50"
-  *zip up plex folder onto external windows media+
  
-====Shutdown and Move server to Bench==== +  
-  *install raid card +
-  *install usb/sata card +
-  *install 128gb ssd externally +
-  *install 32gb ssd onto ODD port +
-  *connect drives to new raid card +
-  *set up raid on ssd drives only at this point +
-  *install latest esxi 6 +
-====Test prior to committing==== +
-  *Copy windows 7 VM into esxi and start up +
-  *Can it do pcie card passthrough allowing esata and usb3? +
-  *Can it write at over 50MBps +
-  *If not install windows 7 natively +
-====Move server to roof rack==== +
-  *Copy owncloud VM into esxi and start up +
-  *change locations in plex to match new server name +
-  *install raid software +
-  *install ups software +
-  *set up raid on data disks +
-  *start copying media back +
-  *set up file shares+
  
-====Move machines==== 
-  *Convert mail, efw25, virtualbox images into esxi 
-  *Move owncloud VM into esxi (already a vmdk) 
-  *Install tinylinux as squeezebox server 
-  *shutdown old virtualbox 
  
-====Tidy Up==== 
-  *Re-enable trash emptying on plex 
-  *Re-enable crons jobs 
-  *Recreate scripts from nas4free onto transcoder server 
- 
-====Backups==== 
-see [[server:esxi_build]] 
server/esxi_move.1451825189.txt.gz · Last modified: (external edit)