The Slades Wiki

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

https://youtu.be/sljJmiwBfnQ

https://wiki.debian.org/NvidiaGraphicsDrivers#Debian_12_.22Bookworm.22

https://www.cyberciti.biz/faq/ubuntu-linux-install-nvidia-driver-latest-proprietary-driver/

https://docs.nvidia.com/datacenter/tesla/driver-installation-guide/index.html#ubuntu-installation

Install the new cuda-keyring package:

wget https://developer.download.nvidia.com/compute/cuda/repos/ubuntu2204/x86_64/cuda-keyring_1.1-1_all.deb
  sudo dpkg -i cuda-keyring_1.1-1_all.deb
  apt-get update
  apt-get install nvidia-open
  apt-get install cuda-drivers
  
  
  
  
  watch -n 0.5 nvidia-smi, will keep the output updated without filling your terminal with output. – 
Bar
 CommentedJul 14, 2016 at 18:26
124
@Bar Good tip. watch -d -n 0.5 nvidia-smi will be even better. – 
zeekvfu
 CommentedJan 17, 2018 at 16:27
20
@zeekvfu I think it'd be better to explain what does the -d flag do – 
donlucacorleone
 CommentedOct 10, 2018 at 14:41
37
@donlucacorleone man watch tells us the -d flag highlights differences between the outputs, so it can aid in highlighting which metrics are changing over time. – 
David Kaczynski
 CommentedOct 21, 2018 at 2:56
2
instead of watch -n 0.5 nvidia-smi you can also use nvidia-smi --loop-ms=500 – 
Jaleks
 CommentedMar 26, 2020 at 10:42
Show 3 more comments
160

For linux, use nvidia-smi -l 1

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International