====== MQTT ======

solar_assistant/inverter_1/temperature/state

voltage_point_2

mosquitto_pub -h 10.0.0.100 -t 'solar_assistant/inverter_1/voltage_point_2/set' -m '48'

mqtt pub -h 192.168.14.34 -V 3 -p 1883 -t 'solar_assistant/inverter_1/voltage_point_2/set' -m '48.0'

===== using centos1 to test: =====


Usage: mosquitto [-c config_file] [-d] [-h] [-p port]

  -c : specify the broker config file.
  -d : put the broker into the background after starting.
  -h : display this help.
  -p : start the broker listening on the specified port.
      Not recommended in conjunction with the -c option.
  -v : verbose mode - enable all logging types. This overrides
      any logging options given in the config file.

See http://mosquitto.org/ for more information.

 [root@centos01 ~]# mosquitto_pub -h 192.168.14.34 -t 'solar_assistant/inverter_1/voltage_point_2/set' -m '48.0'
 [root@centos01 ~]# mosquitto_pub -h 192.168.14.34 -t 'solar_assistant/inverter_1/inverter_power_limiter/set' -m 
 
'2000'
 [root@centos01 ~]# mosquitto_pub -h 192.168.14.34 -t 'solar_assistant/inverter_1/battery_float_charge/set' -m '47'
 [root@centos01 ~]# mosquitto_pub -h 192.168.14.34 -t 'solar_assistant/inverter_1/battery_float_charge/set' -m 
 
'47.0'
 [root@centos01 ~]#