====== Scripts for HP servers in CLI ======
===== Start CLI =====

  
  hpacucli

Find Controller
  ctrl all show
  Smart Array P410i in Slot 0 (Embedded)
  Bus Interface: PCI

Select card and view logical drives
  ctrl slot="0" ld all show

  Smart Array P410i in Slot 0 (Embedded)
  array A

  logicaldrive 1 (136.7 GB, RAID 1, OK)
  array B

  logicaldrive 2 (558.7 GB, RAID 1+0, OK)
  array C

  logicaldrive 3 (279.4 GB, RAID 1, OK)

Check Physical Drives
   ctrl slot="0" pd all show

  Smart Array P410i in Slot 0 (Embedded)

   array A

      physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, OK)
      physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK)

   array B

      physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SAS, 300 GB, OK)
      physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SAS, 300 GB, OK)
      physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SAS, 300 GB, OK)
      physicaldrive 2I:1:8 (port 2I:box 1:bay 8, SAS, 300 GB, OK)

   array C

      physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 300 GB, OK)
      physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 300 GB, OK)