This is an old revision of the document!

To set up the DNS

By default, if your ISP allocates its own DNS servers when the router logs into the ISP, these will then over-ride the manual settings.

If you want to force the manual settings to apply, from telnet you can use this command:

srv dhcp frcdnsmanl on (use 'off' to disable it. Requires f/w 2.5 or later).

like this;

DrayTek> srv dhcp frcdnsmanl on
% Domain name server now is using manual settings!

In more recent firmware (September 05 onwards, varies with model) a new command has been added which supercedes the above command:

DrayTek> ip dns 208.67.222.222 207.67.220.220