Site Tools


home-assistant:rf_receiver

This is an old revision of the document!


RF Receiver

Tasmota Command:

Rule1 ON RfReceived#Data=E2E221 DO Publish tele/%topic% {"rf_data":"%value%"}
BREAK ON RfReceived#Data=084CD2 DO Publish tele/%topic% {"rf_data":"%value%"}
BREAK ON RfReceived#Data=877472 DO Publish tele/%topic% {"rf_data":"%value%"}
BREAK ON RfReceived#Data=7CC825 DO Publish tele/%topic% {"rf_data":"%value%"}
BREAK ON RfReceived#Data=330865 DO Publish tele/%topic% {"rf_data":"%value%"}
ENDON
Rule1 1

Home Assistant Template

alias: Notification - GARAGE FLOOD
description: ""
trigger:
  - platform: mqtt
    topic: tele/tasmota_rfbridge/RESULT
condition:
  - condition: template
    value_template: "{{ '330865' in trigger.payload }}"
action:
  - data:
      title: GARAGE FLOOD ALARM
      message: GARAGE FLOOD ALARM
    action: notify.mobile_app_sony_5_ii
mode: single

Rules in place

  1. Flood Detector > 7CC825 > Washer room flood
  2. 2 button remote button 1 > E2E221 > Driveway Light
  3. 2 button remote button 2 > 877472
  4. Flood Detector > 330865 > Air source water heater
home-assistant/rf_receiver.1728646941.txt.gz · Last modified: (external edit)