qnap:raid_management
This is an old revision of the document!
Table of Contents
QNAP Management
RAID Array Details
This command provides detailed information about the md1 array.
mdadm -D /dev/md1
Monitor RAID Rebuild
cat /proc/mdstat
Scroll RAID Status
while true; do cat /proc/mdstat; sleep 5; done
Edit RAID rebuild rate
echo 50000 > /proc/sys/dev/raid/speed_limit_min echo 100000 > /proc/sys/dev/raid/speed_limit_max
qnap/raid_management.1612440691.txt.gz · Last modified: (external edit) · Currently locked by: 216.73.216.236,192.168.2.28