Site Tools


server:linux_network_commands

This is an old revision of the document!


Linux Network Commands

Display Current Config for all NIC's: ifconfig

Display Current Config for eth0: ifconfig eth0

Assign IP: ifconfig eth0 192.168.1.2

Ping: ping -c 3 192.168.1.1

Assign multiple IP's: ifconfig eth0:0 192.168.1.2

Assign second IP: ifconfig eth0:1 192.168.1.3

Disable network card: ifconfig eth0 down

Enable network card: ifconfig eth0 up

View current routing table: route “or” route -n

View arp cache: arp “or” arp -n

Assign IP/Subnet: ifconfig eth0 192.168.1.2 netmask 255.255.255.0

Assign Default Gateway: route add default gw 192.168.1.1

Add dns into /etc/resolv.conf nameserver 8.8.8.8

Trace Route: traceroute www.whatismyip.com

Trace Path: tracepath www.whatismyip.com

DNS Test: host www.whatismyip.com

Advanced DNS Test: dig www.whatismyip.com

Reverse Lookup: host 66.11.119.69

Advanced Reverse Lookup: dig -x 66.11.119.69

Read more: http://www.whatismyip.com/faq/linux-ip-commands.asp#ixzz29upjcTuF

server/linux_network_commands.1354488497.txt.gz · Last modified: (external edit)